INSTRUMENT SET

Small Fragment Set in Graphic Case

Specifications:

Small Fragment Set in Graphic Case
Instruments and implants for 3.5 and 4.0mm diameter screws
Aluminium case, brown, high, perforated includes

  • Lower Tray
  • Tray for plates
  • Tray for instruments
  • Tray for Screws

SET CONSISTING OF:

   CODE

  DESCRIPTION

  UNITS

  IBS737.25

  Drill Bit, Dia. 2.5

  2

  IBS737.35

  Drill Bit, Dia. 3.5

  2

  IBS700

  Counter Sink for 3.5, 4.0mm Screw (6.0 Head)

  1

  IBS760.35

  Cortical Tap for 3.5mm Screws

  2

  IBS760.40

  Cancellous Tap for 4.0mm screws, 3.5mm screws 1 each

  2

  IBS765

  Quick Coupling handle

  1

  IBS715

  Tap sleeve, 3.5mm diameter/ drill sleeve 2.5mm diameter

  1

  IBS720

  Insert sleeve diameter 3.5mm / 2.7mm

  1

  IBS747

  Small Screwdriver

  1

  IBS745

  Small Screwdriver insert, 2.5mm hex. With quick coupling end

  1

  IBS709

  Small depth gauge

  1

  IBS777.05

  Neutral and load drill guide, 3.5mm

  1

  General Instruments

 

  REH1053

  Sharp Hook

  1

  IBS758

  Self-Holding clip for plates

  2

  IBS753

  Self-Holding screw forceps

  1

  IBP630.01

  Bending iron for small DCP, 1 of each

  2

 

  Bending templates, 5 and 7 holes, 1 of each

  2

  BHF1246.19

  Self Centering bone holding Forceps

  1

  BHF1248.14

  Reduction forceps with points

  1

  BHF1247.14

  Reduction forceps for small fragments

  1

  REH1005.10

  Small retractor, 6 and 8mm width, 1 of each

  2

 

  Retractor for small fragments, with broad shank long

  2

  REH1052.06

   Small periosteal elevator, with straight edge, 6mm width

  1

  713.10 to 713.42

  Small Cortex screws, diameter 3.5/ 1.25mm

  52

 

(4 each of 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 32, 36, 40mm)

 

  725.10 to 725.60

  Small Cancellous bone screws with full length thread, 3.5mm dia.

  30

 

  (2 each of 14, 16, 18, 20, 22, 24, 26, 28, 30, 35, 40, 45, 50mm)

 

  723.10 to 723.60

  Small Cancellous bone screws, short thread, 4.0mm dia.

  28

 

  (2 each of 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 35, 40, 45, 50mm)

 

  760

  Small washers for 4.0mm screws

  6

  639.02 to 639.08

  One third tubular plates, 1 each with 2, 3, 7 and 8 holes

  10

 

  (2 each with 4, 5 and 6 holes)

 

  617.06, 617.08 &
  617.10

  Dynamic compression plates DCP 3.5mm

 

 

  (2 each with 6 and 8 holes 1 with 10 holes)

  5

  642.03 & 642.04

  Small T-plates, right angle, 1 each with 3 and 4 holes in the head

  2

  627.03 & 627.04

  Small T-plates, oblique angle, 1 each with 3 and 4 holes in the shaft

  2

  PS911.015 to
  PS911.020

  Kirschner wires, 10 each of 1.25/1.6/2.0mm dia., Length 150mm

  30

Related Products

What Client's Say

Get FREE Catalogue