| BTD1130 |
Twist Drill (Drill Bit) Q.C. |
|
| BTD1130.25.130 |
Dia 2.5 mm, 130 Length |
2 |
| BTD1130.27.130 |
Dia 2.7 mm, 130 Length |
2 |
| TD1130.35.130 |
Dia 3.5 mm, 130 Length |
2 |
| ILBS736.28 |
Locking Drill Bit (Q.C) 2.8 mm |
2 |
| IBS700 |
Counter Sink 3.5 mm |
1 |
| IBS762.30 |
Bone Tap (Q.C) 3.5 mm |
2 |
| IBS762.40 |
Bone Tap (Q.C) Cancellous 4 mm |
2 |
| IBS765 |
Quick Coupling Handle |
1 |
| IBS723.20 |
Tripple Drill Guide 2 mm |
1 |
| IBS720.25 |
Insert Drill Sleeve 2.5 mm |
1 |
| IBS716.35 |
Locking Drill Sleeve 3.5 mm |
4 |
| IBS786.35 |
Hexagonal Screw Driver with Sleeve 3.5 mm |
1 |
| ILBS746.35 |
Hexagonal screw Driver Shaft 3.5 mm |
1 |
| ILBS786.35 |
Torque Screw Driver 3.5 mm |
1 |
| ILBS737 |
Universal Drill Guide |
1 |
| ILBS738 |
Push Pull Reduction Device |
1 |
| IBS753 |
Screw Holding Forcep |
1 |
| IBS709 |
Depth Gauge 3.5 mm |
1 |
| IBP630.01 |
Plate Bender small |
2 |
| REH1053 |
Sharp Hook |
1 |
| IBS739 |
Threaded Plate Holder |
1 |
| IPW952 |
Wire Bending Plier |
1 |
| BHF1249.13 |
Reduction Forcep Pointed 130 mm (R.Lock) |
2 |
| BHF1249.14 |
Reduction Forcep Pointed 140 mm (R.Lock) |
2 |
| BHF1247.15 |
Reduction Forcep Serreted 150 mm (R.Lock) |
2 |
| BHF1246.15 |
Self Centring Bone Holding 150 mm |
1 |
| IBP637.35 |
Bone & Bone Plate Holding Forcep 3.5 mm |
1 |
| REH1064.25 |
Hohman Retractor 8 mm |
2 |
| REH1064.40 |
Hohman Retractor Broad Shank |
2 |
| REH1067 |
Periosteom Elevator with Fibre Handle 6 mm |
1 |
| ILBS740.07 |
Locking Bending Templates 7 Hole |
1 |
| ILBS740.09 |
Locking Bending Templates 9 Hole |
1 |
| ILBS740.12 |
Locking Bending Templates 12 Hole |
1 |
| AGC1439S |
Graphic container Aluminium |
1 |
